Sponsored by: 3M
Project Summary
Heating and cooling energy to keep buildings at a comfortable temperature account for nearly 25% of the world’s total energy consumption. Low-emissivity windows allow natural light from the sun to illuminate a room, while also preventing unwanted heat from entering or leaving a given building. Low-emissivity films can be an efficient way to reduce heating and cooling energy usage without replacing an entire window. Thus, 3M has been developing low-emissivity window films to meet this need. Validating and optimizing their performance requires the creation of an environmental chamber for accurate and applicable heat flow measurements across glass/film substrates.
Design Goal
Our goal is to create a chamber that will allow for accurate and repeatable experiments to test insulating performance of the low emissivity films and treatments. A test method that will allow operators to produce precise and reproducible results will also be created.
Design Constraints
- Must weigh under 50 lbs., be movable, fit on standard lab workspaces, and change substrate without tools.
- Measure and heat to a temperature difference of about 100 F on either side of the glass.
- Shall be self-contained and be able to run and collect data on its own.
- Measure and read the power draw needed to sustain temperature in the chamber.
- Work with a standard 120 Volts and under 1500 Wh.
![3D model of Heat Flow Chamber and controller](../../../../../_media-library/_images/ug-experience/senior-design/2023-2024/projects/t13-3m-image1.jpg)
3D Model of Heat Flow Chamber and Controller
Members of the Project Team
Student Team:
- Harris Anderson - Major: Mechanical Engineering
- Hyunoh Bae - Major: Mechanical Engineering
- Matthew Brodeur - Major: Mechanical Engineering
- John Larson - Major: Mechanical Engineering
Industry Representatives: Greg King and Adam Readinger
Faculty Advisor: Patrick Willoughby
![Senior Design student team](../../../../../_media-library/_images/ug-experience/senior-design/2023-2024/student-teams/t13-3m-student-team.jpg)
Pictured left to right: John Larson, Matthew Brodeur, Hyunoh Bae, Harris Anderson